MaterialsTransferVacuum transferSupervac®

Supervac®

A range of devices to transfer the powders with good, poor or very poor flow as well as fragile pellets without particle segregation, or dust.

Gamme SUPERVAC

The SUPERVAC® range, registered trademark of CERAM, is the answer to all your requirements

  • Very easy to maintain
  • Independent and complete device
  • Very sturdy design in 316 L mirror finish
  • Very low consumption of air or nitrogen only for declogging and opening of valves
  • Vacuum pump with absolute negative pressure of 3 mbar (with vanes or spouts)
  • Pneumatic vacuum generator (Venturi)
  • Output up to 10,000 litres/h
  • Filtration with automatic declogging
  • Complete draining of the system
  • Low travel speed of products (1 to 5 m/s)
  • Respect for the homogeneity of the product
  • Respect for the quality of fragile products and absence of particle segregation
  • Complies with the Atex standard

Supervac

Our vacuum transfers enable to obtain outputs of up to 10,000 litres/hour with a very compact design and a reduced input power. They thus respond to most transfer problems in pharmaceutical, chemical and food processing industries.

Answers for each one

Supervac

Food processing

  • Supply of mixers, feeders, preparation tanks, etc.
  • Recirculation under sifters, separators, feeding of packaging machines
  • Drainage or filling of containers, bags, drums, big-bags
  • Perfect tightness, no emission of dust
  • Can be easily and safely cleaned in situ

Chemistry

  • Feeding of one or more reactors, mixing tanks with or without inerting
  • High performance of the air/product separation filter, respecting the environment for hazardous products
  • Perfect tightness, no emission of dust

Pharmacy

  • Respect for the containment of the atmosphere thanks to its very high performance filter
  • Complete draining of the system to preserve the management of production lots
  • Feeding of tablet presses, capsule machine and packaging machine for small packets
  • Application in granulation workshops
  • Feeding of pelletizers and calibrators, filling of containers

Vacuum transfer: Principle

A principle that makes the difference!

The vacuum pump 1 generates in the feeder 2 a negative pressure that enables to exhaust in a drum or a bag (through a pipe 5), or under a hopper, a container or a silo (through a connection cone 4) the product to be transferred. A very high efficiency filter separates the transported product from the air sucked in by the vacuum pump. At the end of the programmed transfer time, the vacuum valve 3 closes, the outlet gate 6 opens, the feeder 2 empties and a filter declogging cycle starts. Through a solenoid valve, the air tank empties instantly into the declogging chamber cleaning the filter by reverse flow. The opening/closing time of valves can be set by time outs. The total duration and the number of declogging operations can be set separately. At the end of the declogging cycle, a new transfer cycle starts.